Inspecția de siguranță a macaralei cu portal pe șenile înainte de ridicare
1. Check the lifting machinery to ensure good performance.
2. Before preparing to lift ground assemblies and loose parts, the lifting and binding methods of equipment components should be confirmed based on parameters such as equipment weight and center of gravity position. Afterwards, choose the lifting equipment reasonably.
3. Temporary work platforms for high-altitude operations should be installed on the ground as much as possible.
4. Construction work channels, whether formal or temporary, should be regularly inspected. If safety hazards are found, they should be dealt with immediately.
5. When using heavy duty gantry crane on tracks supplier to lift smaller objects, only one object can be lifted by a single sling, and it is prohibited to lift objects in series.
6. Before lifting equipment components, inspection and cleaning work should be carried out. The accessories and small pieces attached to the equipment should be securely tied and easy to pick up and place. To prevent falling objects from high altitude.
7. Twisting or knotting of steel wire ropes is strictly prohibited during use.
8. When using, the rope should not come into direct contact with the edges and should be padded with protective equipment.
9. The steel wire rope is strictly prohibited from coming into contact with any charged body.
10. Lifting personnel of macara portal industrial on tracks should correctly use ropes and securely bind the objects that need to be lifted.
11. The included angle of a thousand pound rope is generally not greater than 90 °.
12. When two CE approved gantry crane on tracks factory lift objects together, the single vehicle load should be less than 80% of its rated load.
13. Do not place the buckle at the corner of the suspension, and if necessary, add padding.
14. When lifting objects, safety ropes should be tied in advance.
15. After the lifting is in place, temporary fixing measures should be taken to prevent wind and overturning. The hook can only be removed after confirming its firmness.
