9T Suspension Overhead Crane Was Successfully Shipped To Bolivia
Parameter requirement of suspension overhead crane:
9T, S=9m, H=6m, A4, LX Type
Overhang: 1m each side
Control: pendent control
Voltage: 380v, 50hz, 3 phrase
We have a customer from Bolivia needs LX single girder suspension overhead crane for their warehouse. Required specification as above show.
Because the space limit for the installation, after check carefully with the customer what is their real needs, we provide design proposal of LX single girder suspension brifge crane for their warehouse. Specially they need 1m overhang for each side to extend the operation area. The LX suspension crane has been shipped Successfully and works very well at present.
LX single girder suspension bridge crane is also called single beam suspension overhead crane, single girder under-hung overhead crane. It is used with monorail CD or MD electric hoist.
It owns tight dimension, low building headroom, light dead weight and light wheel load. It is a light duty track traveling crane with I beam track. The standard capacity is 0.5T, 1T, 2T, 3T, 5T; the span is from 3m to16m.
LX bridge crane consists of four components: single girder, end carriage, electric hoist and electric control equipment.
LX Electric single girder bridge crane is a light duty crane. Typically, an under-hung runway is suspended from the roof of the building and is available only on lighter capacities, not more then 10 tons.
This LX Electric Single Girder Suspension Crane is mainly used in the location where is no possible install columns to support the overhead crane. The end trucks of the under-slung bridge crane ride on the bottom flange of the runway beam.
LX Electric Suspension Crane is good for working environment within working temperature between -25C- +40C. Prohibited to use in locations, where are stocks of flammable, explosive and corrosive materials.
